Описание
*Попитайте за наличност*
The BCN3D Sigma R19 is a professional FFF (Fused Filament Fabrication) 3D printer able to print every object you might set your mind on with very high detail. It is characterized by its IDEX (Independent Dual Extruder) system, which allows to print without geometric limitations and offers the possibility of combining existing techniques such as multi-material, multi-color and support printing.
| Architecture | IDEX |
| Technology | Fused Filament Fabrication |
| Build Volume | 210mm x 297mm x 210mm |
| Number of extruders | 2 |
| Nozzle diameter | 0,3mm; 0,4mm (standard); 0,5mm; 0,6mm; 0,8mm; 1,0mm |
| Heated Bed | PCB |
| Screen | Full Color Capacitive TouchPAD |
| Connectivity | SD Card (autonomous); USB |
| Electronics | BCN3D Electronics v1.0; Independent Stepper Drivers |
| Firmware | BCN3D Sigma – Marlin |
| Supported files | gcode |
| Operating Sound | 50 dBA |
| Certifications | CE; FCC |
| Layer height | 0,05 – 0,5mm (depending on the nozzle diameter) |
| Positioning resolution | (X/Y/Z) 12,5 µm / 12,5 µm / 1 µm |
| Operating temperature | 15°C – 35°C |
| Extruder maximum temperature | 290°C |
| Extruder maximum printing temperature | 280°C |
| Heated bed maximum temperature | 100°C |
| Support material | PVA |
| Filament diameter | 2,85 ± 0,05 mm |
| Compatible Materials | PLA, ABS, PVA, Co-polyester, Nylon, TPU, HIPS, Specials |
| Тегло | 18 kg |
| Размери | 46.5 × 44 × 68 cm |
Отзиви
Все още няма отзиви.